top of page
RUTX50 5G Router

INDUSTRIAL 5G ROUTER

RUTX50 is a dual-SIM multi-network router offering 5G mobile communication for high-speed and data-heavy applications. Together with 5x Gigabit Ethernet ports and dual-band Wi-Fi, it enables reliable data transfer with auto-failover. Backward compatibility and multiple interfaces allow for long-term expandability and upgrading options.

RUTX50 5G Router

  • MOBILE

    • Mobile module

      5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL

    • SIM switch

      2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

    • Status

      Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation

    • SMS

      SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

    • USSD

      Supports sending and reading Unstructured Supplementary Service Data messages

    • Black/White list

      Operator black/white list

    • Multiple PDN

      Possibility to use different PDNs for multiple network access and services

    • Band management

      Band lock, Used band status display

    • APN

      Auto APN

    • Bridge

      Direct connection (bridge) between mobile ISP and device on LAN

    • Passthrough

      Router assigns its mobile WAN IP address to another device on LAN

    WIRELESS

    • Wireless mode

      802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

    • WiFi security

      WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

    • SSID/ESSID

      ESSID stealth mode

    • WiFi users

      up to 150 simultaneous connections

    • Wireless Hotspot

      Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

    ETHERNET

    • WAN

      1 x WAN port  10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

    • LAN 

      4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

    NETWORK

    • Routing

      Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

    • Network protocols

      TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

    • VoIP passthrough support

      H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

    • Connection monitoring

      Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

    • Firewall

      Port forward, traffic rules, custom rules

    • DHCP

      Static and dynamic IP allocation, DHCP Relay, Relayd

    • QoS / Smart Queue Management (SQM)

      Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

    • DDNS

      Supported >25 service providers, others can be configured manually

    • Network backup

      WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

    • Load balancing

      Balance Internet traffic over multiple WAN connections

    • Hotspot

      Internal/external Radius server, captive portal, built in customizable landing page

    • SSHFS

      Possibility to mount remote file system via SSH protocol

    SECURITY

    • Authentication

      Pre-shared key, digital certificates, X.509 certificates

    • Firewall

      Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

    • Attack prevention

      DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

    • VLAN

      Port and tag based VLAN separation

    • Mobile quota control

      Custom data limits for both SIM cards

    • WEB filter

      Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

    • Access control

      Flexible access control of TCP, UDP, ICMP packets, MAC address filter

    VPN

    • OpenVPN

      Multiple clients and a server can run simultaneously, 12 encryption methods

    • OpenVPN Encryption

      DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

    • IPsec

      IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

    • GRE

      GRE tunnel

    • PPTP, L2TP

      Client/Server instances can run simultaneously, L2TPv3 support

    • Stunnel

      Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

    • DMVPN

      Method of building scalable IPsec VPNs

    • SSTP

      SSTP client instance support

    • ZeroTier

      ZeroTier VPN client support

    • WireGuard

      WireGuard VPN client and server support

    MODBUS TCP SLAVE

    • ID range

      Respond to one ID in range [1;255] or any

    • Allow Remote Access

      Allow access through WAN

    • Custom registers

      MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

    MODBUS TCP MASTER

    • Supported functions

      01, 02, 03, 04, 05, 06, 15, 16

    • Supported data formats

      8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

    MODBUS DATA TO SERVER

    • Protocol

      HTTP(S), MQTT, Azure MQTT

    MQTT GATEWAY

    • MQTT Gateway

      Allows sending commands and receiving data from MODBUS Master through MQTT broker

    DNP3

    • Supported modes

      TCP Master, DNP3 Outstation

    MONITORING & MANAGEMENT

    • WEB UI

      HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

    • FOTA

      Firmware update from server, automatic notification

    • SSH

      SSH (v1, v2)

    • SMS

      SMS status, SMS configuration, send/read SMS via HTTP POST/GET

    • Call

      Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

    • TR-069

      OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

    • MQTT

      MQTT Broker, MQTT publisher

    • SNMP

      SNMP (v1, v2, v3), SNMP Trap

    • JSON-RPC

      Management API over HTTP/HTTPS

    • MODBUS

      MODBUS TCP status/control

    • RMS

      Teltonika Remote Management System (RMS)

    IOT PLATFORMS

    • Cloud of Things

      Allows monitoring of: Device data, Mobile data, Network info, Availability

    • ThingWorx

      Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

    • Cumulocity

      Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

    • Azure IoT Hub

      Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

    SYSTEM CHARACTERISTICS

    • CPU

      Quad-core ARM Cortex A7, 717 MHz

    • RAM

      256 MB (100 MB available for userspace)

    • FLASH storage

      256 MB (80 MB available for userspace)

    FIRMWARE / CONFIGURATION

    • WEB UI

      Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

    • FOTA

      Update FW/configuration from server

    • RMS

      Update FW/configuration for multiple devices at once

    • Keep settings

      Update FW without losing current configuration

    FIRMWARE CUSTOMIZATION

    • Operating system

      RutOS (OpenWrt based Linux OS)

    • Supported languages

      Busybox shell, Lua, C, C++

    • Development tools

      SDK package with build environment provided

    LOCATION TRACKING

    • GNSS

      GPS, GLONASS, BeiDou, Galileo and QZSS

    • Coordinates

      GNSS coordinates via WebUI, SMS, TAVL, RMS

    • NMEA

      NMEA 0183

    • NTRIP

      NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

    • Server software

      Supported server software TAVL, RMS

    • Geofencing

      Configurable multiple geofence zones

    USB

    • Data rate

      USB 2.0

    • Applications

      Samba share, USB-to-serial

    • External devices

      Possibility to connect external HDD, flash drive, additional modem, printer

    • Storage formats

      FAT, FAT32, NTFS

    INPUT / OUTPUT

    • Input
       

      1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

    • Output
       

      1 x Digital Output, Open collector output, max output 30 V, 300 mA

    • Events

      Email, RMS, SMS

    • I/O juggler

      Allows to set certain I/O conditions to initiate event

    POWER

    • Connector

      4-pin industrial DC power socket

    • Input voltage range

      9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max

    • PoE (passive)

      Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC

    • Power consumption

      Idle: < 4W, Max: 18W

    PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)

    • Ethernet

      5 x RJ45 ports, 10/100/1000 Mbps

    • I/O’s
       

      1 x Digital Input, 1 x Digital Output on 4-pin power connector

    •  Status LEDs

      3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs

    • PHYSICAL INTERFACES SIM RUT #07

      2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V

    • Power

      1 x 4 pin power connector

    • Antennas

      2 x SMA for LTE, 2 x RP-SMA for WiFi

    • USB
       

      1 x USB A port for external devices, 1 x USB A port for external devices

    • Reset

      Reboot/User default reset/Factory reset button

    • Other
       

      1 x Grounding screw
       

    PHYSICAL SPECIFICATION

    • Casing material

      Aluminum housing

    • Dimensions (W x H x D)

      132 x 44.2 x 95.1 mm

    • Weight

      533 g

    • Mounting options

      DIN rail (can be mounted on two sides), flat surface placement

    OPERATING ENVIRONMENT

    • Operating temperature

      -40 °C to 75 °C

    • Operating humidity

      10% to 90% non-condensing

    • Ingress Protection Rating

      IP30

Related Products