top of page
TSW200 8-PORT INDUSTRIAL POE+ GIGABIT ETHERNET SWITCH

TSW200 is an industrial Ethernet switch with 2 SFP ports for long-range Fiber-optic communication and 8 Gigabit Ethernet ports that support IEEE802.af and IEE802.3at Power-over-Ethernet standards. Classified as power source equipment (PSE), it enables the centralization of the power supply, providing up to 30 watts per port and reducing the effort to install power. 

TSW200 8-PORT INDUSTRIAL POE+ GIGABIT ETHERNET SWITCH

  • ETHERNET

    • ETH - 8 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

    • Fibre - 2 x SFP ports

    • IEEE 802.3 series standards - 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

    POE OUT

    • PoE ports - Port 1 - 8

    • PoE standards - 802.3af and 802.3at Alternative B

    • PoE Max Power per Port (at PSE) - 30 W

    • Total PoE Power Budget (at PSE) - 240 W

    PERFORMANCE SPECIFICATIONS

    • Bandwidth (Non-blocking) - 20 Gbps

    • Packer buffer - 128 KB

    • MAC address table size - 2K entries

    • Jumbo frame support - 9216 bytes

    POWER

    • Connector - 2-pin industrial DC power socket

    • Input voltage range - 7 – 57 VDC

    • PoE-out input voltage range - 44 – 57 VDC

    • Power consumption - Idle: 1.81 W / Max: 5.5 W / PoE Max: 245.5 W

    PHYSICAL INTERFACES

    • Ethernet - 8 x RJ45 ports, 10/100/1000 Mbps

    • Fibre - 2 x SFP ports

    • Status LEDs - 1 x Power LED, 16 x ETH status LEDs 2 x SFP status LEDs

    • Power - 1 x 2-pin industrial DC power socket

    • Other - 1 x Grounding screw

    PHYSICAL SPECIFICATION

    • Casing material - Full aluminum housing

    • Dimensions (W x H x D) - 132 x 44.2 x 95.1 mm

    • Weight - 517 g

    • Mounting options - DIN rail or wall mounting (additional kit needed), flat surface placement

    OPERATING ENVIRONMENT

    • Operating temperature - -40 °C to 75 °C

    • Operating humidity - 10% to 90% non-condensing

    • Ingress Protection Rating - IP30

    REGULATORY & TYPE APPROVALS

    • Regulatory - CE, UKCA, CITC, ANRT, FCC, IC, CB

    EMC EMISSIONS & IMMUNITY

    • Standards

      EN 55032:2015 + A1:2020

      EN 55035:2017 + A11:2020

      EN IEC 61000-3-2:2019 + A1:2021

      EN 61000-3-3:2013 + A1:2019

    • ESD - EN 61000-4-2:2009

    • Radiated Immunity - EN IEC 61000-4-3:2020

    • EFT - EN 61000-4-4:2012

    • Surge Immunity (AC Mains Power Port) - EN 61000-4-5:2014 + A1:2017

    • CS - EN 61000-4-6:2014

    • DIP - EN IEC 61000-4-11:2020

    • Standards

      IEC 62368-1:2018

      EN IEC 62368-1:2020+A11:2020

Related Products