TSW110 is an unmanaged layer 2 Ethernet switch. This tiny but rugged professional device enables industrial high-bandwidth applications with a reliable data connection. It has five Gigabit Ethernet ports to connect equipment to the network and supports wide power supply voltages (9-30 V).
TSW110 5-PORT INDUSTRIAL GIGABIT ETHERNET SWITCH
ETHERNET
-
ETH - 5 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
-
IEEE 802.3 series standards - 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az
PERFORMANCE SPECIFICATIONS
-
Bandwidth (Non-blocking) - 10 Gbps
-
Packer buffer - 128 KB
-
MAC address table size - 2K entries
POWER
-
Connector - 4-pin industrial DC power socket
-
Input voltage range - 9 – 30 VDC
-
PoE (passive) - Possibility to power up through ETH1 ports, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
-
Power consumption - < 0.4 W/ < 1.8 W
PHYSICAL INTERFACES
-
Ethernet - 5 x RJ45 ports, 10/100/1000 Mbps
-
Status LEDs - 1 x Power LED, 10 x ETH status LEDs
-
Power - 1 x 4-pin power connector
-
Other - 1 x Grounding screw
PHYSICAL SPECIFICATION
-
Casing material - Full aluminum housing
-
Dimensions (W x H x D) - 100 x 30 x 85 mm
-
Weight - 227 g
-
Mounting options - DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature - -40 °C to 75 °C
-
Operating humidity - 10% to 90% non-condensing
-
Ingress Protection Rating - IP30
REGULATORY & TYPE APPROVALS
-
Regulatory - CE, UKCA, EAC, UCRF, ANRT, CITC, Kenya, FCC, IC, NOM, RCM, BSMI, CB
EMC EMISSIONS & IMMUNITY
-
Standards
EN 55032:2015 + A11:2020
EN 61000-3-3:2013 + A1:2019
EN IEC 61000-3-2:2019
EN 55035:2017
-
ESD - EN 61000-4-2:2009
-
Radiated Immunity - EN IEC 61000-4-3:2006 + A1:2008 + A2:2010
-
EFT - EN 61000-4-4:2012
-
Surge Immunity (AC Mains Power Port) - EN 61000-4-5:2014 + A1:2017
-
CS - EN 61000-4-6:2014
-
DIP - EN 61000-4-11:2004 + A1:2017
-
Standards
IEC 62368-1:2018
EN IEC 62368-1:2020+A11:2020
-
